Showing posts with label arts and crafts. Show all posts
Showing posts with label arts and crafts. Show all posts

Tuesday, June 5, 2012

Superhero Belt [Craft Tutorial]

Last weekend, I crafted some X-Men belts with vinyl, hot glue, and snaps.


These are the belt "buckles" I made a few weeks ago out of thin wooden discs and two layers of craft foam (the X design is cut into the top layer), painted with acrylic paint and finished with mod-podge. You can cut any design you want out of the craft foam and use mod podge to attach it to the wooden disc. If you use mod podge as a finish, use a foam brush so you don't end up with brush stroke lines (or use a spray paint finish). These "buckles" are super lightweight so they won't weigh down on the rest of the belt and the raised design out of craft foam looks cool.


The belt material is marine vinyl purchased at Jo Ann fabrics. You can find it in the upholstery section. It looks a bit pricey at about $16 a yard, but seeing as 1) you only have to buy a few inches of it and 2) it is 54" wide and 3) you should have a 40% off coupon, you can get all you need for a few dollars.

For my solid color belt, I cut a 3-3/4 inch wide strip. I wanted my belt to be 2-3/4 inches wide and I added a half inch for "seams" on both sides.


I drew a pencil line a half-inch in from the top and used that as a guide when folding over the unfinished edge. I used binder clips to hold the fabric in place while I applied hot glue directly to that pencil line. Note - don't put the binder clips back on after adding the hot glue - you don't want binder-clip marks permanently pressed into your belt.


After doing the entire pencil line, I went back and added a second application of hot glue, this time under the unfinished edge to hold it in place.

Next I added sew-on snaps to one end of my belt. I tried it on for size and had to cut off some of the end. I also added them at an angle so the belt would sit more naturally on my waist. It was difficult to sew through the vinyl/glue layers - I would have used an upholstery needle but ours wouldn't fit through the snaps. If I did this again, I would find a way to add the snaps before the hot glue step.


When you place the snaps, put them as far toward the edge of the belt as you can (not like the one pictured!). My belt "buckle" initially stood out at a funny angle because it wasn't secured close enough to the edge and I ended up having to add a third snap.


I used hot glue to attach the "buckle" to the outside end of the belt.


There you have it! A Kitty Pryde belt.

To do a two-color belt like the one Colossus has, use two strips of vinyl. Make one the width you want your belt to be, and make the other strip the same width plus the width of your top and bottom stripes.

So, for example, to make a belt that is four inches wide with one-inch yellow stripes on top and bottom and a two-inch red stripe in the middle, you would cut a four-inch wide strip of red and a six-inch wide strip of yellow.

Match wrong sides together. Wrap the edges of your top and bottom stripes down over the main color and finish the same way for a one-color belt, except that side will end up being the outside of your belt and not the inside.

It might seem easier to just add stripes with spray paint, but using two different colors of vinyl will help you avoid accidents like this at ComiCon:


Good luck, and happy costuming!

Sunday, October 9, 2011

Katara (Avatar: The Last Airbender)

This weekend I have been working on my Halloween costume: Katara from the Avatar cartoons.  Ryan and Chris got me watching them during my senior year of college.  I am not a big fan of cartoons in general, so I was a little skeptical, but this series completely won me over.  The characters are lovable and the story lines are very consistent throughout all three seasons.



I thought it would be fun to dress up as Katara and, if the costume turns out well, it would also be an option for Comic Con next spring (I would have to make Ryan Aang or Sokka, of course).  I went to Jo Ann's on Friday night and bought a pattern (Simplicity patterns were only $0.99!) and some fabric.  I decided to go with the bright shiny costume satin since I thought that would look more cartoon-y.


The dress came together really easily but it is rather large.  Fortunately with the wrap-around style this won't matter as much in the long run.


On Saturday I did some shopping.  I bought a long-sleeved navy shirt and leggings to wear underneath and made another trip to Jo Ann's for choker supplies and light blue fabric for the middle sleeves.


After my second day of working I had finished making the choker and pinned the fake fur to the bottom of the skirt.


It took me about ten minutes of searching, but eventually I found ribbon clamps at the store for the choker.  The ribbon is just normal blue ribbon.  I'm still not sure how I'm going to attach the pendant to the necklace - in the cartoon, the pendant is attached by some kind of gold or brass fastener.  I couldn't find anything at the store that looked similar, but I did find gold clip-on earrings.  As you can see in the photo, it doesn't look too bad.



I wasn't sure what to do for a pendant, but I did some searching online and saw that some people had success using Sculpey or modeling clay.  The only kind they had at the store was this weird kind of Crayola stuff that I wasn't sure about but bought anyway as I had no other options.  It was light and felt like airy, pliable plastic.  I made a lot of pendants as I wasn't sure how well they would turn out.  I varied the size and thickness of them to cover all my bases.  And I figured I would have a lot of backups if one (or six) break.


After putting it all together, it looks pretty good on the dress dummy.


Unfortunately, it does not look very good on me yet!  I still have a lot of work to do next weekend.  The top needs to be altered a bit since the neck and shoulders are too big.  The skirt is longer in front than in back.  I need to add clasps to hold the white belt in place.  And I'm going to re-hem the sleeves and skirt with blue thread (it is currently white).  And I need shoe covers!

Other than that I am pretty happy with it.  I am still a novice seamstress so it's good to get more practice.