Showing posts with label Colossus. Show all posts
Showing posts with label Colossus. Show all posts

Tuesday, June 5, 2012

Superhero Belt [Craft Tutorial]

Last weekend, I crafted some X-Men belts with vinyl, hot glue, and snaps.


These are the belt "buckles" I made a few weeks ago out of thin wooden discs and two layers of craft foam (the X design is cut into the top layer), painted with acrylic paint and finished with mod-podge. You can cut any design you want out of the craft foam and use mod podge to attach it to the wooden disc. If you use mod podge as a finish, use a foam brush so you don't end up with brush stroke lines (or use a spray paint finish). These "buckles" are super lightweight so they won't weigh down on the rest of the belt and the raised design out of craft foam looks cool.


The belt material is marine vinyl purchased at Jo Ann fabrics. You can find it in the upholstery section. It looks a bit pricey at about $16 a yard, but seeing as 1) you only have to buy a few inches of it and 2) it is 54" wide and 3) you should have a 40% off coupon, you can get all you need for a few dollars.

For my solid color belt, I cut a 3-3/4 inch wide strip. I wanted my belt to be 2-3/4 inches wide and I added a half inch for "seams" on both sides.


I drew a pencil line a half-inch in from the top and used that as a guide when folding over the unfinished edge. I used binder clips to hold the fabric in place while I applied hot glue directly to that pencil line. Note - don't put the binder clips back on after adding the hot glue - you don't want binder-clip marks permanently pressed into your belt.


After doing the entire pencil line, I went back and added a second application of hot glue, this time under the unfinished edge to hold it in place.

Next I added sew-on snaps to one end of my belt. I tried it on for size and had to cut off some of the end. I also added them at an angle so the belt would sit more naturally on my waist. It was difficult to sew through the vinyl/glue layers - I would have used an upholstery needle but ours wouldn't fit through the snaps. If I did this again, I would find a way to add the snaps before the hot glue step.


When you place the snaps, put them as far toward the edge of the belt as you can (not like the one pictured!). My belt "buckle" initially stood out at a funny angle because it wasn't secured close enough to the edge and I ended up having to add a third snap.


I used hot glue to attach the "buckle" to the outside end of the belt.


There you have it! A Kitty Pryde belt.

To do a two-color belt like the one Colossus has, use two strips of vinyl. Make one the width you want your belt to be, and make the other strip the same width plus the width of your top and bottom stripes.

So, for example, to make a belt that is four inches wide with one-inch yellow stripes on top and bottom and a two-inch red stripe in the middle, you would cut a four-inch wide strip of red and a six-inch wide strip of yellow.

Match wrong sides together. Wrap the edges of your top and bottom stripes down over the main color and finish the same way for a one-color belt, except that side will end up being the outside of your belt and not the inside.

It might seem easier to just add stripes with spray paint, but using two different colors of vinyl will help you avoid accidents like this at ComiCon:


Good luck, and happy costuming!

Tuesday, May 15, 2012

Comics, Costumes, and Craft Foam

Since ECCC, Ryan and I have been researching and experimenting with ways to improve our original costumes and brainstorming ideas for new ones.

Kitty and Colossus Upgrades

We decided to modify our suits a little bit to make them more "rugged."Instead of spandex dancewear, we want to wear costumes that look like they would actually protect us from bodily harm - so faux leather, vinyl, heavy polyester knit, etc. Also, working with a heavier fabric would make it easier to add details like shoulder flares, which would make my costume a lot more recognizable and make Ryan's costume a lot more cool.

I made us new belt buckles last weekend out of thin wooden discs, craft foam, acrylic paint, and mod-podge. They are much lighter than our previous belt buckles and thinner too. We are still stumped on the best way to make the belt itself, but my latest idea involves a strip of vinyl and velcro. More on that later when they are finished and I have photos.

A guy dressed as Cyclops gave me a link to a site where he bought yellow gloves with gauntlet cuffs and I bought some a few weeks ago, but unfortunately they are too big for me. I probably should have seen that coming since they were "one size fits all" adults. Ah well.

Craft Foam


Craft foam is seriously our new favorite thing. There are plenty of tutorials out there so I don't need to go into specifics about how it works, but basically... you can make ANYTHING. And it looks AMAZING. I made Ryan a red bracer cuff as a potential replacement for the vinyl/velcro ones he had that started ripping at the convention and it looks awesome. Not only that, it is surprisingly durable - after a few coats of paint and mod-podge, it doesn't crease, crack, or fold. I am excited to try this new technique on... well, everything.

Next Year?


So I have been reading comic books - a LOT of comic books - and one of my new favorite superheroes is Hisako Ichiki, aka Armor, from the X-Men. Her power is creating a protective "armor" around her body.


Ryan was reading a book with Armor in it last night and suddenly got the genius idea to replicate Armor's armor with an inflatable bodysuit - like a sumo suit or the Stay Puft Marshmellow Man from Ghostbusters - only make it out of clear orange plastic.


It would be quite a challenge to construct, but if it worked, the payoff would be so cool. And plus, I already have a lot of the costume elements - yellow boots, yellow gloves, black bodysuit (though I would need to get a black wig). Fun fact: the first real X-Men uniform Hisako wore was one of Kitty Pryde's, and it was after Kitty left the team that Hisako was invited to join. So it would be fitting to make her my next project.


Does anyone have about ten yards of clear iridescent orange vinyl lying around?

Tuesday, April 3, 2012

ECCC Part 3: The "least colossal Colossus ever"




Costumes
Kitty Pryde (Lauren McLaren)
 and Colossus (Me)
Our morning started around 8 am.  We woke up and started getting into our costumes by 9 am.  I previously posted about our costumes for the event.  My girlfriend went as Kitty Pryde and I went as Colossus.  (If you follow the comics, you may be aware that Kitty and Colossus recently broke up after Colossus took on the Bands of Cytorrak to help the Xmen stop the Juggernaut from destroying San Francisco in the Fear Itself story arc, but we went as a couple anyway.)  It took about an hour to finish my makeup and we finally got to the con at about 10:30 am.

Galactus and Silver Surfer
We had expected to turn some heads, but neither of us were prepared for the amount of attention we received.  Before we could get our passes and get into the event, we were swarmed by people wanting to take pictures with us.  We didn't even make it into the first panel because we stopped for so many pictures.  The coolest thing about dressing up was how excited people got. "You two are my favorite couple!" was a phrase we heard a lot.  We even got tweeted by a CB Cebulski from Marvel.  And on one blog that had a photo gallery of the cosplayers, I found my favorite quote: "That is the least colossal Colossus ever."


Falcon!
The coolest costumes that we saw at the event were Galactus (Marvel Comics), Falcon (Marvel Comics), and Bender (Futurama).  We got an opportunity to chat with Galactus when we all got stuck in an impromptu Marvel photo session.  He had made the entire suit himself, including the helmet.  His wife sewed all the fabric and he made all the hard plastic pieces from fiberglass, resin, balsa wood, and foam.  As you can see in the picture it was amazing.  The Falcon outfit was awesome too.  He even had wings that folded out to wow the crowds.  But the best (and most annoying) thing about that guy was the he was tall, buff, and handsome like a super hero.  People like that ruin the curve for average people like myself.  Finally, there was the Bender costume.  It looked great, but the best part were all the accessories that they had for it: different eyes, a mouth with a cigar, and a tutu.

The Plane Express Crew
Overall, the experience was amazing.  My GF and I had fun making the costumes, I learned a whole lot about the comic industry, and met some really cool and creative people.  We're already looking forward to next year.  Got any good ideas for a costume?!

Ten Things I Learned at ECCC, Part II

6. Comic book culture is way cooler than I thought.

It was neat to be around so many people who were so passionate about comic books. I think sometimes comic books seem like a thing of the past, since the core characters have been around for so long.  Plus, with all the superhero cartoons aimed at children, comic books can be seen as a little kid thing - but that is so not the case.  There were people of all ages at the convention, celebrating both old and new comics.

I was also impressed by the insightful dialogue in the panel discussions, which showed a depth to the genre that I hadn't known about before.  For example, a guy at the Marvel panel spoke to the guests about how Marvel is a leader in the industry and asked how they can lead the fight against negative, sexist, or sexualized portrayals of women in comic books.  One panelist brought up Katniss from the "The Hunger Games" in his response as an example of a successful female action hero and expressed a desire for comic book writers to take note of that success.

Up until now I have only read a few comic books and seen some of the movies, but going to the convention really inspired me to seek out more.



7. "Takai" is a Japanese word that means "expensive"

We saw part of the panel with special guest George Takei, who was very funny and very charming.  He commented on the pronunciation of his last name, noting that while the correct pronunciation is "ta-kay," it is also acceptable to say "takai" because it means "expensive" in Japanese.  Then he made a joke about "just be sure to send me the bill." It was also funny to hear him talk about the Internet and how he was amazed that someone sent him a whole song online.  Even though he experienced futuristic technology on Star Trek, he still sounded in awe of the technology available to us today.



8. Voice actors are hilarious

One of the evening panels was "Star Wars: The Radio Play." All the voice actors who came to the convention sat together onstage and read through the script for the first Star Wars movie - in character. Who played who varied by scene, but at one point Darth Vader was voiced by Bubbles from the PowerPuff Girls and Princess Leia was voiced by Bender from Futurama. Ryan enjoyed this more than I did since he watches more cartoons and could recognize the voices, but the unscripted banter between the voice actors was humorous enough to keep me entertained as well.  Definitely worth watching.



9. ComiCon is a great place to make friends!

Like I said before, we had a few opportunities to chat with other guests about how they made their costumes.  We ended up spending a lot of time with the other Marvel cosplayers throughout the day - posing for pictures, waiting in line at the costume contest, or hanging out before panels.  Plus, whenever we saw other X-Men around the con, it felt like we were running into old friends.  In addition to the characters I mentioned above, we saw Rogue, Dazzler, Nightcrawler, and Cyclops, just to name a few.

Ryan's biggest fan was a cute little Supergirl, who waved at him a few times as we walked around and then bumped into him while we were perusing the booths.  When we ran into her again, we knew we had to get a picture.

Then tonight, on my flight to LA (spring break!!!), the guy sitting next to me noticed I was reading comics on my iPad and asked if I had been at the convention.  It turns out he was one of the costume contest judges! We chatted a bit and he was really cool. Then a few minutes later the guy on the other side of us leaned over and mentioned he was an artist and offered us some of his promotional bookmarks! I heard Adam Baldwin and someone from Star Trek were up in first class, too.  I wonder how many other incognito "superheroes" were on the plane with us...


10. If you ask a silly question at a panel, expect to be blogged about.

We went to a panel in the afternoon that spotlighted C.B. Cebulski, one of the head honchos at Marvel. Ryan, being the clown that he is, thought it would be funny to go up and ask a question about Colossus in character.  I was reluctant to go up, but Ryan assured me that it would be funny.

I would write about what happened when we got to the mic, but I don't need to because some people already have!  It seems a lot of people got quite a kick out of Ryan's little moment in the spotlight (and his fake Russian accent).  Check out these blog posts:

Pint O' CB Panel at Comic Booked
Marvel Creators Drink a Pint O' CB at Comic Book Resources
Colossus and Kitty Pryde in AvX #5 at Comics Blend



All in all it was a really fun day and I'm already looking forward to next year!

Monday, April 2, 2012

ECCC Part 2: Panels




Panels
The panels started at the top of each hour and were supposed to run for 50 minutes or so, but a lot of them ran over which screwed up the schedule.  And because many of the panelists were booked at back-to-back panels, they sometimes showed up late.  I think the whole show could have benefitted from running the panels on tighter schedule.  But regardless of that, all the panels we attended were fun and educational.  The first panel we went to we missed because it filled up before we could get there.  After that we learned to show up early.

The second panel was How to Edit Comics.  I've done film/tv editing and I know the role of a literary editor, but I didn't know the first thing of what it takes to edit a comic book.  Turns out the editor is like a ringmaster at a circus, coordinating between all the different artists (pencilers, inkers, colorists, etc.) to make sure that the book hits all its deadlines.

The third panel was Pint O' CB where fans got to ask any questions they had for Marvel Comics' Senior Vice President of Creative and Creator Development, C.B. Cebulski.  Since this was a Marvel panel and we were dressed as Kitty and Colossus, I decided to go up and ask a question in character.  The panel didn't release any groundbreaking news, but it was fun and we all had a some good laughs.

The fourth panel was Starting a Successful Kickstarter.  Kickstarter is a website where people can raise funding for their projects.  It was a very informative panel and I encourage any creative types with a good idea to go take a look.

The fifth panel was Oh My, It's George Takei.  This panel was held in a huge hall with probably a thousand seats.  We lined up 30 minutes early and still had to wait to get in because so many people had stayed in the hall after the previous panel.  It was worth the wait.  George Takei is very funny and he had the whole audience going with all of his funny stories.  However, the moderator was Danny Bonaduce.  He got a few laughs out of me, but I mostly just thought he was an ass.

The final panel we went to was the Star Wars Radio Play and it was my favorite.  The panel consisted of famous voice actors from Futurama, Pinky and the Brain, Finding Nemo, Teen Titans, etc.  Billy West, Tara Strong, Maurice LaMarche, John DiMaggio, Kevin Conroy, Jess Harnell, and Rob Paulsen did a reading of New Hope while there were randomly assigned different voices by the moderator.  My favorite combo was Futurama's Bender as Princess Leia performed by John DiMaggio and Power Puff Girls' Bubbles as Darth Vader performed by Tara Strong.  I love doing impersonations and voices, so I was enthralled and inspired by the talent on stage.

The panels were all very interesting and entertaining.  We would have liked to have gone to more, but we were also busy showing off our costumes.  Come back tomorrow and I'll tell you all about it.

Ten Things I Learned at ECCC, Part I

Ryan and I attended the Emerald City Comic Convention on Saturday. We had a lot of fun and learned a lot - about costumes, comics, and conventions in general.


1. Wearing a costume all day is a big commitment.

Throughout the day, a lot of people clapped Ryan on the shoulder and said "Wow man, that takes commitment!" While at first we didn't know what they meant by that, we eventually realized why it takes commitment to be in costume all day.  It was tons of fun to wear costumes, but we didn't anticipate the effect that wearing costumes would have on our overall experience.

It took a long time for us just to get from place to place because a lot of people would stop us and ask to take a picture. Then once we were stopped, it sometimes took a while to get moving again. We wanted to attend a panel at 11am but missed it because it took so long just to get through the crowds.  I wish I had worn a clicker on my belt to keep track of how many photos were snapped of us.  Ryan estimates that we had our picture taken by about 250-300 different people throughout the day.

Also, costumes can be uncomfortable or cumbersome. Fortunately ours were pretty versatile, but we saw plenty of others with wings/accessories/etc. that were not. We showed up at about 10:30am and stayed at the convention until 9:30pm, which made for a long day in shoes that were not made for walking.  It is also awkward trying to do normal things like use the bathroom or eat lunch in costume.  We both had to take our gloves off to eat and Ryan had to reapply his lipstick a few times throughout the day.

We decided that it might be better to get weekend passes and spend one day in costume taking lots of pictures and another day in plain clothes to enjoy all the panels and booths.  Or maybe bring your costume and change in the middle of the day.


2. It is pretty cool when everyone wants to take your picture.

As I said before, it can be inconvenient, but overall going in costume is an awesome experience. A lot of the compliments we got were things like "Seeing you guys made my day!" or "Oh my gosh, my favorite couple!" or "I'm so glad you guys are here!" People were genuinely glad to see us, and that felt good.  It was definitely worth it to go in costume when all is said and done.

It is also fun to see yourself on the Internet the next day, especially when the person who tweets your photo turns out to actually work at Marvel!


3. When it comes to costumes, the real thing is better than a facade

You might think you are really clever for making a Captain America shield out of cardboard or attaching a strip of red vinyl to your store-bought leather belt - until you get to the convention and realize that there is someone there with a real shield or a real red vinyl belt. And more often than not, the real version looks better, wears better, and gets more positive feedback from the other people at the con. Ingenuity is all fine and good, but it isn't a substitute for genuine craftsmanship.

Part of our problem was just that we didn't know what techniques are out there for making costume pieces.  We had a few opportunities to chat with other cosplayers about how they made their costumes and picked up a lot of good tips.  One girl who was dressed as Pixie had really cool gauntlets and greaves that she made out by layering craft foam, carving it, and covering it in mod-podge.  A guy dressed as the Silver Surfer made his surfboard out of insulation foam and plexiglass.  Our favorite cosplayer was Galactus, whose entire costume was handmade by him and his wife, including tons of details done with resin and plexiglass.  Now that we've had a chance to talk to people and get some tips, we'll have more options for next time.


4. Speaking of costumes, go for WOW factor.

If you want your costume to be a big hit, you need something special. My Kitty Pryde costume was about as spot-on as they come, but it wasn't really a showstopper. Ryan's metal skin, on the other hand, turned heads everywhere we went. He got a lot of compliments throughout the day and many people mentioned that they had never seen a Colossus cosplay before (as an aside: there were three other Kitty Prydes there). We also got a lot of attention as a couple because our costumes "matched," which was an added bonus.

Movable parts are also commendable: one of our favorites was a guy dressed as Falcon, who made giant wings out of vertical blinds. When he spread his wings onstage at the costume contest, he completely stole the show. In a similar vein, there were a lot of costumes that lit up. All of which had crazy WOW factor.

Also, it is worth mentioning: do NOT go dressed as Dr. Who, the Joker, Harley Quinn, or Phoenix.  There were about a million of those.


5. If you want to break into the industry, just start doing it.

The inevitable question that comes up at panels is "how do I break into the industry?" It was interesting to hear many guest speakers say "Just start making comic books!"

The first panel we went to was about editing comic books.  I didn't realize how many different roles there are in creating one comic book - and it all starts with a writer and a script.  Then there are artists, colorists, and letterists - and editors and producers that are in charge of monitoring the whole process.  The speakers emphasized that the best way to show an editor what you are capable of is to have a body of work to refer to, so they encouraged everyone to find some friends and just make a comic book together.  It was the same story at the panel with a bunch of Marvel writers.  They all said that they just loved comic books and started making them, and one thing led to another and pretty soon they were writing Spider Man.

Now, keep in mind none of them said that making comic books would ever pay the bills.  We attended a panel about Kickstarter that was aimed at people trying to get funding for their creative projects, and both of them were very honest about how much time and money personal projects require, even with a successful Kickstarter campaign.  They also emphasized the importance of building an audience first, through blogging or social media, and in order to build a following you have to be willing to give away a lot of content for free.

There were plenty of people at the convention who seemed to be following their advice.  The exhibition hall was jam-packed with artists selling their original comics and art.  It was really cool to walk around and see all the different styles and genres of comic books, from typical superheroes to mythology and historical comics and humor.  Many of them were sketching at their booths, which was fun to watch.

Monday, March 26, 2012

Exploring Washington: Count down to ECCC

Last fall, long before I moved to Seattle, my girlfriend, Lauren, and I decided we wanted to go to the Emerald City Comicon in full Cosplay outfits.  I was onboard from the get-go.  My girlfriend was the first to decide on a character. She called me one day and was very excited to tell me she had decided on Kitty Pride from the X-Men (she is the girl that can walk through walls).  I laughed at her and asked why she picked an xmen from the b-list and she had a simple answer: she has red hair. I told her that there was plenty of other way more iconic women from the Marvel Universe with brown hair. But then I started looking and I found out that really isn't. All of the women have jet black, fire red, or bleach blonde hair. And since she didn't want to buy a wig, Kitty was the best choice.

So then I picked Kitty's mutant boyfriend, Colossus (the big Russian guy that turns his skin into liquid metal).  My first thought was how awesome of a character that is for a Cosplay costume.  But then I started to realize just how much work it was going to be. Nonetheless, with ECC this weekend, I am happy to say that Kitty and Colossus will be there and we are very much ready to go.


Friday, September 9, 2011

Cosplay: The Beginning

I love dressing up in costumes.  I am a regular Fairegoer and Halloween is my favorite holiday.  Really, going to comicon will just be one more excuse to dress up!

Ryan and I are already planning on attending a convention up here in Seattle next spring.  We have been brainstorming costume ideas and we have decided to go as Kitty Pryde and Colossus from X-Men.  I decided on Kitty first because I wanted to pick someone I sort of look like in real life (read: not wear a wig! Surprisingly, there aren't many brunette superheroes).

We have both been doing a lot of internet research into costume pieces - primarily unitards, because I am not very confident in my ability to sew lycra.  I just have this horrible image in my head of the two of us showing up at the convention and having our costumes fall to pieces in front of everybody!  Wouldn't that be embarrassing?  It was also a challenge to find yellow boots (for me) and red boots (for Ryan) until I was directed to this site which has women's gogo boots in all colors and a pretty good selection of men's boots as well.  Unfortunately, I still have no idea where I'm going to find a pair of yellow gloves with gauntlet cuffs.

I was going to be satisfied with buying a black unitard and layering a yellow leotard over it for my bodysuit until I started doing a little more browsing and saw some of the really amazing costumes that are out there.  For example, I know who I want to be when I grow up.  I am so inspired/jealous/impressed/amazed by what some people are wearing that the idea of just buying a few leotards and calling it a super suit just seems lazy and boring!  So we'll see how ambitious I get.  Maybe there will be some lycra sewing in my future after all.

But for now - if you see a pair of yellow gloves with gauntlet cuffs... I need them!!!